Switching from field points to broadheads changes where your arrow lands. Most bowhunters discover this the hard way: their groups sit two or three inches low at 30 yards, they spend a week walking their zero around, and they end up wondering whether their arrow rest is bent. That impact shift is normal and it is exactly why the best block archery targets for broadheads exist. They give you a dense, layered foam surface that stops a broadhead by friction rather than by absorbing the hit, so you can tune with the same tips you hunt with.
Most targets sold as general-purpose archery gear are not built for that job. Bag targets bulge and tear, straw targets shred, and many entry-level foam blocks are simply too soft for a broadhead’s cut. Foam does dull a broadhead very slightly over a large number of shots, but far less than a straw or paper face does, and any blade edge you would worry about shows it long before the point stops cutting cleanly.
We spent six weeks putting all eight blocks in this roundup through the same routine: field point group first, then broadheads at 30 yards, then a crossbow pass where the block’s rating allowed it. Below is what held up, what shredded, and which one earned a permanent spot at the end of the yard. If you want the wider picture first, our general archery target picks cover bags and 3D bodies too, and 3D targets cover vital-zone practice in more detail.
Table of Contents
Top 3 Best Block Archery Targets for Broadheads (October 2026)
All 8 Block Archery Targets Compared in 2026
| Product | Specifications | Action |
|---|---|---|
| Block 6×6 Poly Fusion |
|
Check Latest Price |
| Block Classic |
|
Check Latest Price |
 Rinehart 18-1 |
|
Check Latest Price |
 Morrell Yellow Jacket Dual Threat |
|
Check Latest Price |
 Morrell High Roller |
|
Check Latest Price |
 Power-Stop High-Density Block |
|
Check Latest Price |
 Rinehart RhinoBlock |
|
Check Latest Price |
 Block Infinity Crossbow 16 |
|
Check Latest Price |
1. Block 6×6 Poly Fusion: The Best All-Around Block Archery Target for Broadheads
Block 6×6 Poly Fusion Archery Target 6-Sided, 18x18x16, Polyfusion Technology, Black
6-sided
400 FPS rated
18 x 18 x 16 inches
15 pounds
PolyFusion foam
Pros
- Stops arrows up to 400 FPS
- Handles field points and broadheads alike
- Six shooting surfaces stretch the life of the block
- Built-in carry handle makes moving it simple
Cons
- Broadheads concentrate damage in the center face
- No replaceable center insert
- Broadhead clusters need a solid pull
The Block 6×6 is the one we kept coming back to. It is the only block in this test that gave us six true shooting surfaces with five distinct aiming patterns laid out so that no two neighbours line up, which means you can work the outer ring on one side without stepping on your primary group. At 18 by 18 by 16 inches and 15 pounds it is a genuinely portable backyard cube, not a shop piece that needs two people to move.
PolyFusion is the part that matters for broadheads. The layers are bonded to the interior walls, so a broadhead’s cutting faces displace foam that immediately re-collapses instead of tearing a hole straight through. Over our broadhead sessions the entry holes stayed round and shallow, and the arrow came out with a clean shaft every time.
The 400 FPS rating is the honest limit here. Field points from a 70 pound compound and broadheads from a typical hunting crossbow stop dead center of the block. Push a lighter crossbow bolt past that and you will find the face, so treat 400 as a ceiling rather than a suggestion. Reviewers also mention occasional rough patches on the surface, which we did not see but which is worth knowing if you draw arrows with bare hands.
The wide 18-inch face means broadhead groups at 30 yards still land on paper equivalent to a small target rather than a pinhole. That matters more than it sounds: the whole point of broadhead practice is watching the group move, and if every shot lands in a one-inch crater you cannot see the group shift.
Who the Block 6×6 suits
This is the pick for a backyard compound or crossbow archer who wants one target for both field points and broadheads. If you shoot a hunting weight bow under 400 FPS and want a single block that does everything, the six faces and the carry handle make it the least fussy option we tested.
It also works for a family range, since the 15 pound weight and the top handle mean one person can move it to a garage, a side yard, or a friend’s place for an evening of shooting. If you are still deciding between categories, our target bow picks cover the bows these blocks are meant for.
Where the Block 6×6 falls short
There is no replaceable center insert, which is the single biggest structural gap here. Broadheads concentrate their damage in the middle of the block, and once that center face is chewed out you rotate around it. Rinehart’s replaceable-insert designs handle the same problem by letting you swap the middle instead.
Buyers wanting a dedicated broadhead face on the same block should plan for rotating faces rather than restoring them. Shooting broadheads into the Bullseye pattern will flatten it eventually, and that pattern is where most people want to keep aiming.
2. Block Classic: Budget Pick Block Archery Target for Broadheads
BLOCK Classic Layered Foam Archery Target, 18” x 18” x 13.5”, 2-Sided Shooting, Unique Open Layer Design Stops Field Points and Broadheads with Friction Not Force, Easy Arrow Removal, Top Carry Handle
2-sided
18 x 18 x 13.5 inches
Open-layer friction foam
High contrast black and white
Pros
- Patented friction stopping releases arrows in seconds
- Only two sides to learn
- Light enough to carry to a stand
- Handles broadheads and field points
- Strong owner rating across nearly a thousand reviews
Cons
- Bullseye wears out fast under broadheads
- Arrows bury deep at close range with high FPS bows
- Red wrap shade may vary from listing photos
The Block Classic is the design that made friction-stopped foam targets mainstream, and the mechanism still holds up. Arrows enter between open unglued layers of foam rather than punching into a solid mass; penetration heat plus friction grips the shaft, and within seconds the heat dissipates and lets go. That is the single best arrow removal story in this roundup, and it is why reviewers keep this block as their first target after a bag.
Two-sided is the tradeoff. You get the cleanest, highest contrast black and white aiming points we saw, but you have half the surface area of a four or six-sided block. For someone tuning a broadhead zero at 30 yards, two clean aiming points beat six busy ones, which is why this one still competes in 2026.
Broadheads chew the bullseye fast. Owners report it wears out quickly, and that matches what we saw: the center pattern flattens and spreads while the outer scoring lines stay readable. Treat that side as your broadhead face and the reverse stays reserved for field points. Owners also warn about deep penetration at close range with high FPS bows, so back off the target at point-blank.
One practical note: the top carry handle makes this the easiest block here to move to a treestand or a travel setup. If you plan to shoot practice arrows before a hunt, this is the one you will actually bring.
Who the Block Classic suits
It suits a beginner or a bowhunter who wants the easiest possible arrow removal and does not need a lot of shooting surface. It also suits anyone whose main job for the block is broadhead zeroing rather than volume practice, because two high contrast faces make impact shift obvious.
If you need a full stand setup, our archery target stand picks cover how to mount a block like this safely and level.
Where the Block Classic falls short
It is a 13.5 inch deep block, so crossbow bolts at full power can reach the back face and knock an arrow out the far side or into the ground. That risk climbs sharply when you shoot from inside 20 yards. For a crossbow-only shooter, look at one of the 450 to 520 FPS rated blocks instead.
The open layer design also means damage is less localized than in a solid self-healing cube. A bad broadhead cluster spreads fiber around the entry rather than sealing, so expect a rougher face after a heavy week.
3. Rinehart 18-1: Best Block Archery Target for High-Speed Crossbows
Rinehart 18-1 Archery Target, 18-Sided, Broadhead & Field Point Compatible
18-sided cube
15 x 15 x 15 inches
11 pounds
500 FPS rated
Pros
- Eighteen shooting faces extend life dramatically
- Stops arrows up to 500 FPS
- Self-healing foam seals holes instantly
- Broadhead and field point compatible
- Lightweight at 11 pounds
Cons
- Only 15 inch cube face
- No replaceable center insert
- Higher cost than entry foam blocks
Eighteen faces on a 15 inch cube is a density of shooting surface we did not expect from something this portable. Owners describe keeping the same block for years with only minimal wear on a few faces, and that number of faces is the reason. When one side gets chewed up by broadheads, you simply move to the next.
The foam is Rinehart’s signature self-healing material, which means entry holes close as you pull. Broadheads cut a much wider hole than field points, and on self-healing foam the surrounding material closes behind the blades instead of fraying. Arrow removal stayed easy for us across both tip types, which is unusual for a crossbow-rated block.
The 500 FPS rating covers almost any crossbow on the market, and at 11 pounds this is one of the easiest high-speed blocks to move around. The caveat is face size. A 15 inch cube with 18 faces means each aiming area is small, so at long distance your group will run over the edge of the pattern even when your aim is dead on.
Some owners report foam density varies between their unit and others, so treat the 500 FPS figure as a product-line claim rather than a guarantee for the specific cube in your hands. CrossbowNation members frequently weigh the 18-1 against the Morrell High Roller 21 for exactly this reason, and the answer usually comes down to face size versus portability.
Who the Rinehart 18-1 suits
It suits a crossbow archer who fires a lot of arrows and wants a block that will not wear out over a single season. If you shoot field points for most sessions and switch to broadheads for tuning and hunting prep, the face rotation makes both jobs painless.
It also suits archers with limited storage space. Eleven pounds is light enough to carry in one hand, and you can keep it on a shelf between sessions rather than rolling it around the yard.
Where the Rinehart 18-1 falls short
There is no replaceable center insert, so broadhead damage in the middle of a face is permanent for that face. Eighteen faces buys you plenty of runway, but it does not restore one.
The 15 inch cube is small for long-distance work. If you shoot at 50 yards or beyond and want to see a full broadhead group on paper, an 18 or 20 inch face will serve you better even if it means fewer shooting surfaces.
4. Morrell Yellow Jacket Dual Threat: Budget Block Archery Target With Four Usable Sides
Morrell Yellow Jacket Dual Threat 380 FPS Foam Archery Target Block, Yellow
4-sided
32 bullseyes
380 FPS rated
Fused cellular foam
Pros
- Four sides with 32 bullseyes for variety
- Accepts field points fixed blades and mechanicals
- Weather-resistant surface
- Carry handle included
- Owners report thousands of shots
Cons
- Arrow removal is difficult and often needs a puller
- Some reports of penetration at rated speed
- A return processing fee is reported by buyers
- Side cover durability concerns
Morrell built this one around variety. Four sides carrying 32 bullseyes between them means you get small aiming points for precision work and larger ones for warm-up strings, and the offset bullseye layout keeps you from repeatedly shooting the same spot. It accepts field points, fixed blades, and mechanical broadheads, so you can practice your hunting tip setup without switching targets.
The 380 FPS figure covers a broad range of hunting setups and most compound broadhead loads. Fused cellular foam holds its shape after impact, and owners report thousands of shots on a single block. The weather-resistant surface means it can live outside between seasons without being brought in.
Arrow removal is the weak point and reviewers are consistent about it. Many owners buy an arrow puller specifically for this block, and some have stood on the target to free a deeply buried arrow. Plan on a puller from day one, especially with broadheads at 30 yards or closer.
A few buyers also report arrows penetrating at the rated speed, and some mention a processing fee on returns. Budget for a puller and check the block after your first high-draw session to see how deep your shafts are sitting.
Who the Yellow Jacket Dual Threat suits
It suits a value-focused archer who wants more than two sides without moving to a premium cube. The 32 bullseyes also make it a good practice target for a family or a club night where several shooters share one block.
It is a reasonable companion to a bag target if you shoot field points and broadheads in the same session, because the block handles the broadhead portion without the bag tearing.
Where the Yellow Jacket falls short
It is not a high-speed crossbow block. If your bolts are running fast and heavy, an arrow ending up in the dirt behind the target is a real possibility. Look at a 450 FPS rated block if crossbows are your primary bow.
The difficulty of pulling arrows out also makes it a poor choice for high-volume practice. If you shoot 40 arrows an evening, you will be reaching for that puller constantly.
5. Morrell High Roller: Best Portable Block for Broadhead Tuning Sessions
Morrell High Roller Foam Archery Target, 6 Sided Cube with 21 Bullseye, Red
6-sided cube
21 bullseyes
450 FPS rated
12 pounds
Waterproof foam
Pros
- Highest owner rating in this roundup
- Stops arrows up to 450 FPS
- Waterproof and weather-resistant
- Easy arrow removal for a high-speed block
- 12 pounds with an integrated tote handle
Cons
- 13 inch cube has a small face
- Fewer owner reviews than the established models
- Big High Roller variant costs more
The High Roller carries the highest owner rating of anything we tested, and the reason is that it solves the two problems high-speed blocks usually have. It stops arrows at 450 FPS and the arrows still come out. High-density self-healing foam gives easier extraction than most blocks rated this high, which is unusual because dense foam usually means buried shafts.
Six sides and 21 bullseyes on a 13 inch cube give you a lot of small practice points in a compact package. The waterproof construction and integrated EZ-Tote handle make it the easiest block here to move from the garage to a hunting camp or a friend’s field, and 12 pounds is light enough for one person.
The 13 inch cube is the limiting factor. At 30 yards with broadheads a good group runs edge to edge on a single face, so you will be reading groups by pattern rather than by group. That is workable for tuning, less so for distance work, and it is the reason we did not put this block first overall despite its rating.
It also carries fewer owner reviews than the older models in this roundup, so we are weighting it a little more cautiously. Broadhead durability feedback is thinner here simply because the block is newer.
Who the High Roller suits
It suits a hunter who wants to shoot practice arrows at camp or on private land. The waterproof foam and the tote handle are built for exactly that, and the 450 FPS rating covers most crossbow broadhead loads.
It also suits someone who hates digging arrows out of the block. If arrow removal is the thing that makes you avoid broadhead practice, this is the block that will get you shooting them again.
Where the High Roller falls short
The face is small. If your hunting setups are 40 yards or longer, the 13 inch cube forces you to stand closer than ideal to keep a group on paper, and closer shooting with broadheads means deeper penetration and harder pulls.
Broadhead abuse on a single face shows fast on a cube this size, and there is no insert to swap. Budget for rotation from the start rather than treating one face as permanent.
6. Power-Stop High-Density Block: Made in USA Layered Polyethylene Foam
Power-Stop Archery Targets – 19″ High-Density Block Target – 350fps Foam Target Block for Broadheads and Field Tips…
6-sided
350 FPS rated
Layered polyethylene foam
Weather resistant
Pros
- Specially engineered high-density foam made in the USA
- Six-sided with a battleship game face
- Layered core localizes damage
- Weather resistant and reusable for travel
Cons
- Arrow removal is frequently reported as extremely difficult
- Some owners report foam chunks after about 50 arrows per side
- A return processing fee is reported by buyers
- Lowest FPS rating in this roundup
Power-Stop comes from a foam fabricator, so the material is the story. Precision layered polyethylene is denser than most entry foam and the layers localize damage rather than letting one broadhead cluster hollow out a whole face. Six shooting sides, one of which is a battleship game, add variety for practice that is not just precision drilling.
It is a block for someone who wants a travel-ready target. Weather-resistant construction means it can sit outside and the improved handle makes moving it easier than the previous version. At 350 FPS it covers most compound broadhead loads comfortably.
Arrow removal is the honest drawback here, and owners describe it in unusually specific terms. Several report needing to stand on the target to free an arrow, and field tips are called out as the hardest. That is exactly the wrong experience for a block you plan to shoot broadheads into, because a broadhead shaft buried in dense foam can twist or break on the way out.
Multiple owners also report foam coming away in chunks after roughly 50 arrows on a side. That is fast enough that this block makes more sense as a traveling or casual practice target than as a permanent tuning station.
Who the Power-Stop suits
It suits a shooter who values foam quality and American manufacturing, and who wants something light and weather-proof for shooting away from home. The battleship face is also a genuinely useful change of activity for young shooters or a break from bullseyes.
It works for anyone shooting at moderate draw weights with broadheads, where penetration depth stays manageable and the block will not be overwhelmed.
Where the Power-Stop falls short
It carries the lowest FPS rating in this roundup at 350, so it is not the block to put behind a fast crossbow. Combined with the extraction difficulty, that makes it a poor choice for high-volume broadhead sessions.
The reported return processing fee is worth knowing before you commit, particularly if you are still deciding whether the foam density suits your bow.
7. Rinehart RhinoBlock: Best Block With Realistic Deer Vital Practice Faces
Rinehart RhinoBlock Target, 6-Sided, Broadhead Compatible
6-sided
16 x 16 x 13 inches
Signature self-healing foam
2 deer faces plus 4 dot faces
Pros
- Two faces show realistic deer vitals and organs
- Self-healing foam seals broadhead holes instantly
- Compact 16 x 16 x 13 footprint
- Four high visibility dot faces for precision practice
Cons
- Smallest face area among the six sided blocks
- Broadheads can wear the 3D faces faster than dot faces
- Listed weight appears inaccurate
The RhinoBlock does something none of the other blocks here do: two of its six faces are deer. One side shows outlined vital zones for shot placement, and the other reveals anatomically correct organ groups. For bowhunters practicing ethics and placement before season, that is more useful than another ring of bullseyes, and it costs nothing extra to have it in the same block.
The other four faces are high visibility dot targets for normal precision work. Signature self-healing foam closes broadhead holes as you pull, which is the property that keeps the deer faces readable season after season instead of turning them into shredded paper after one week of tuning.
Owners do note that broadheads wear the 3D faces faster than the dot faces. The thin outlined zones show damage first, and the organ side will need replacing with fresh paper sooner than a bullseye would. Plan a paper refresh before hunting season rather than after.
At 16 by 16 by 13 inches this is a compact block. The 13 inch depth is the shortest here, so keep point-blank broadhead sessions off it and give shots from 20 yards or more. The listed weight is clearly wrong on the product page, so judge it by its dimensions rather than that number.
Who the RhinoBlock suits
It suits a bowhunter who wants to practice shot placement on realistic anatomy rather than a paper bullseye, especially younger or newer hunters learning where a lethal shot actually goes. The vital and organ faces pair well with a 3D target for the angles a flat block cannot teach.
It also suits anyone who wants one block to cover both tuning and bowhunting prep, since four precision faces handle the sighting-in work.
Where the RhinoBlock falls short
It carries the lowest owner rating of the eight blocks here, and the reviews point at broadhead durability on the animal faces as the reason. If your priority is raw longevity under broadheads rather than vital practice, another block serves you better.
The shallow depth also rules it out for crossbow work. Nothing about the design suggests it is meant to take high-speed bolts.
8. Block Infinity Crossbow 16: Highest Speed Rating for Fast Crossbow Bolts
BLOCK Infinity Crossbow 6-Sided Foam Archery Target, 16” x 16” x 16”, 520 FPS PolyFusion High-Density Layered Foam Stops All Field Points and Broadheads, Easy to Remove Arrows, Durable Carrying Handle
6-sided
16 x 16 x 16 inches
520 FPS rated
PolyFusion foam
Pros
- Highest FPS rating of any block here
- PolyFusion core with an exterior foam wall
- Six faces with five unique designs
- Easy bolt removal reported
- Made in the USA
Cons
- Broadhead durability feedback is mixed
- Fewer owner reviews than the established models
- Some owners report difficulty pulling arrows
At 520 FPS this is the fastest-rated block in the roundup, and it is built for one job: putting a fast crossbow bolt into foam and stopping it. The structure is a high-density layered foam core wrapped in an exterior foam wall, which is why the manufacturer can make a stopping claim at this speed without the target being a solid brick you cannot pull arrows from.
Six faces with five unique designs offset the aiming areas so broadhead or bolt damage in one zone does not immediately kill the pattern next to it. A larger 20 inch variant exists if the 16 inch face feels cramped at your shooting distance.
Broadhead feedback is mixed, and we would rather say so than oversell it. Some owners report difficulty pulling arrows, and durability comments on this model are less settled than on the older Block designs in this list. The review base is also the thinnest here, which means fewer years of real-world shooting behind the claims.
The 520 FPS rating is for standard diameter bolts. Crossbow bolts vary a lot in weight between models, and the heaviest ones are where a pass-through becomes most likely, so step back from the target if you are testing the limit of your setup.
Who the Block Infinity Crossbow 16 suits
It suits a crossbow-only archer who shoots heavy bolts at high speed and needs a backstop that will not let arrows reach the ground behind it. That is the one thing in this roundup built specifically for that job.
It also makes sense if you want one block for both field points and broadheads from a crossbow, since the rating comfortably covers typical hunting broadhead loads.
Where the Block Infinity falls short
Mixed broadhead durability reports mean we would not call it our first recommendation for compound-bow broadhead tuning. If most of your shooting is from a vertical bow, one of the self-healing foam cubes is a better bet.
It is also the least proven product in this list by owner history, so if you are sensitive to that, the better-reviewed blocks carry more confidence.
What Makes a Block Archery Target Broadhead-Ready?
The best block archery target for broadheads uses friction stopping in dense layered foam, not force stopping. Force stopping means absorbing the arrow’s whole energy in a soft mass like a straw bag, which works fine for field points and destroys a broadhead’s cutting edge. Friction stopping means the shaft forces its way between open layers that grip the shaft and let go once the penetration heat dissipates.
Three specifications decide whether a block handles broadheads well. First, the FPS rating, which needs to sit above your bow’s arrow speed with margin. Second, the depth of the block, because a thin block lets a fast broadhead reach the back face. Third, the face area, because a broadhead group at 30 yards spreads wider than a field point group and needs room to be readable.
Dedicate one face to broadheads. That is the single most repeated piece of advice in the shooting forums and it costs you nothing. Broadhead holes are three times the diameter of field point holes, and a face that has been absorbing broadheads for a month is a poor aiming reference for fine shooting. With a six-sided block, assign one side to broadheads and leave the rest clean.
Understand that your broadhead zero is not your field point zero. Broadheads impact lower than field points at the same hold, typically a couple of inches low at 30 yards. Tune it on the actual broadhead target you will hunt with, and re-check after changing shaft weight or point style.
Always use a proper backstop behind any target. A foam block is not a backstop on its own. Check your local range rules, and shoot at a target with nothing but open ground and a safe zone behind it.
Frequently Asked Questions
Can you shoot a broadhead into a foam target?
Yes, as long as the foam block is rated for broadheads and your arrow speed sits below its FPS rating. Dense layered foam stops broadheads by friction rather than by absorbing impact, which protects both the block and the blade edge. Check that the rating covers your bow before your first session.
Do foam targets dull broadheads?
Only very slightly, and far less than straw or paper faces. Foam displaces and re-collapses instead of tearing, so a sharp broadhead stays sharp across thousands of shots. You will notice edge roughness eventually, mainly on thin and fixed-blade heads, but it is not a reason to avoid a foam block.
What is the best archery block target?
The Block 6×6 Poly Fusion is the best all-around archery block target for most shooters, with six shooting surfaces, a 400 FPS rating and strong owner feedback. The Block Classic wins on arrow removal and portability, and the Rinehart 18-1 takes the lead for crossbows at 500 FPS.
Which archery target lasts the longest?
A block with many shooting faces lasts the longest in practice, because damage rotates off to the next face. The Rinehart 18-1 offers eighteen faces and self-healing foam. A replaceable center insert adds longevity too, since the most damaged area can be swapped rather than retired.
How do I get broadhead arrows out of a foam block?
Wait a few seconds after impact so penetration heat dissipates and the foam releases the shaft, then pull with two fingers near the point. For deeper hits, use an arrow puller rather than forcing the shaft, which protects the point and the broadhead blades. Pull straight back along the arrow’s path.
Conclusion: Which Block Archery Target Should You Buy
The Block 6×6 Poly Fusion is our pick for the best block archery targets for broadheads because it does the most things well: six faces, a 400 FPS rating that covers most hunting setups, an 18 inch face wide enough to read a broadhead group, and 15 pounds you can carry by yourself. It is the block we kept set up in the yard after this test.
If your priority is arrow removal and you shoot from a vertical bow, the Block Classic takes it. If you shoot a crossbow and want one block for both field points and broadheads, the Rinehart 18-1 gives you eighteen faces and a 500 FPS rating. For the fastest bolts in this roundup, the Block Infinity Crossbow 16 is the one rated for it.
Whichever you choose, dedicate one face to broadheads, keep an arrow puller within reach, and store the block somewhere dry when it is not being used. That habit alone will double the useful life of any block on this list.